The New Parastorm Buggy is made to the highest standard in England . It’s made from a combination of different High Quality Stainless steal in various states . All bolts under heavy load are of Aircraft or Racing Spec resulting in superior quality and strength giving you a buggy that is over three times as strong!

The rear beam/Axle has Bump Steer that means that when the kite if fully powered up, it depresses the suspension causing the rear wheels to turn against the force. This rear wheel steer enables the buggy to remain in a straight line, as posed to carving sideways and loosing speed.

The seat and bag are made out of the highest quality woven nylon impregnated onto sheet form PVC, giving outstanding strength and water proofing. Leg support has been incorporated into the seat design, giving the rider optimum comfort and support. This has all been achieved without restricting the users arm movements.

A revolutionary new way of fixing the neck of the buggy is achieved with the aid of two turn screw handles mounted at 45 degrees to the centre of the material, this gives a set-up time of 10 seconds and no spanners required. The two tubes cross over design gives four times as much strength as a conventional buggy with minimal weight gain.

To be used anywhere by anyone from a beginner to the most experienced rider.

The designer (Kerion Bradley ) works for the BMW Formula 1 team as a Materials Engineer . He can offer there technological innovations that can be manipulated and implemented towards Para-Karting.